Tips For Replacing a Window Handle

The replacement of your window handle is an easy project that can be accomplished in the convenience of your own home. Use these helpful tips to ensure an easy operation and a beautiful looking finish.

Begin by removing the screws to reveal the screws within the uPVC window handle. Then measure the spindle length to ensure that you receive the correct size replacement.

1. Take a measurement of the Spindle Length

If you're replacing a window handle, it's important to determine the dimensions of the spindle correct. This is because it could determine how tight or loose the handle is and whether it's able to lock properly inside the frame of the window. The spindle is a metallic shaft that connects the handle to the lock inside the window frame. The spindle can be found in the standard 8mm cross-section for industry or the older versions that measure 9mm. The modern industry standard is 8mm but this was not always the case, so when buying a new handle it is important to check the dimensions.

Remove the handle. This can be done easily by turning the handle into the open position, then taking off two screws that hold the handle in place (which are usually hidden behind plastic caps that must be removed). After removal, measure from the base of the handle until the end of the spindle. This will give you the measurement needed to purchase a replacement door handles.

There are a lot of options when it comes to selecting the right window handle from sleek chrome that blends in with a modern home, to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more traditional Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing to do is select a style that is suitable for your home.

Espag handles are generally fitted to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. Window handles from Cadenza come in an entirely different dimension because they have an angle blade that operates an interlocking mechanism that is multi-point inside the window.

Another consideration when selecting the right window handle is knowing which hand you require to use. This is determined by what hand you use to open the double glazed door handles. Inline Espag handles For bifold Doors can be used with right or left-handed windows. Cranked window handles are handed and are only used on windows that open in one direction.

2. Remove the Handle

Whether the handle is damaged or simply worn out the handle of a window that falls off can be very frustrating. The good part is that replacing the uPVC window locking handles handle is a straightforward task you can complete yourself. You will require only a few basic hand tools and some time to complete the task.

You will need to first open the window and make sure it's not locked. Next, you need to remove the screws which hold the handle in place. Once the screw caps are removed you will be able remove the handle.

The handle is attached to a spindle inside the window frame. Depending on the type the handle is held in place either by a screw or a pin. The most commonly used types of handles are inline Espagnolette handles and handles with cockspurs. Both of these types of handles are utilized on casement windows, including aluminum windows. They can be locked using keys to prevent the opening of the window from the outside, or you can lock them by turning the handle clockwise.

To take the handle off, you will need a flat-bladed screwdriver. Once this is released, the handle will fall off the spindle. Once the old handle has been removed, you'll need to determine the length of the spindle and ensure that the new handle is a good fit.

Once you have the correct size, you can put the new handle in the correct position. It is essential to ensure that the handle is securely attached and that it is rotating in the correct direction (clockwise in the case of an open and counterclockwise if handle is closed). It is also crucial to make sure that it has not been installed upside down.

Replace the screw caps. Once you have done this, you can test the handle to make sure that it works properly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked position and then back.

3. Remove the Screws

A uPVC handle is an essential element of any home and is the first thing that shows signs of wear or damage. This can be caused by natural causes or from frequent use, and sometimes deliberate damage by opportunistic criminals who wish to open a locked window and gain entry to your property. However, a simple repair can easily solve the problem and stop the issue from occurring again.

UPVC handles can be difficult to open if the locking mechanism isn't functioning properly. In most cases, the issue is solved by replacing the multipoint lock instead of the entire handle and it's worthwhile to check this out since it can save you money.

After you've removed the old handle you'll need to remove the screws that were holding it in place. The screws are typically located on the inside of the handle base. It could be necessary to use a screwdriver to do this. Be careful not to over tighten the handle since this could cause it to become loose.

You will then need to locate the fixing screws or pins that hold the new handle in place. Again these are likely to be found on the inside of the base of the handle and you'll need either a screwdriver or pair of pliers in order to remove the screws. If you'd like to replace them, you can do so by replacing the caps on the screw and test the handle to ensure it works properly.

When you're ready to install the new handle, simply line up the spindle with the cut out in the window mechanism and screw it in place. Make sure the handle is in the open position and that any screws are securely secured prior to replacing the screws' covers, should you wish to do so. You're done! Now you can enjoy your newly installed window handle. Hopefully this will help you avoid the need for expensive window and door replacements in the future. Contact us if need more information about this or any aspect of your uPVC window.

4. Install the New Handle

Whether you're replacing a broken handle or simply making it more modern the procedure is easy and can be accomplished in a matter of a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll need to complete the task are key. Always ensure the safety of your windows and tools. Be sure to follow the steps and make sure that you have the right handle to use.

The first step is to identify the screws that hold your existing window handle and take them out, while maintaining an adequate grip on the handle itself to stop it from falling suddenly and causing injury. Once the screws are removed, you can place them in a safe place to be replaced later.

After removing the old handle, you can begin installing your new handle. The handle should be a perfect fit for it to function properly and keep the window in its closed position. The next step is to slide the square metal bar at the back of the handle into the hole of the window mechanism, making sure it is secure.

After your new handle is installed, the final thing to do is replace the caps on the screws and check to see if it works. If you are not satisfied with the results, or the window doesn't open and close properly, call our experts for help.

Almost all homes in the UK have uPVC windows, and as such, many of them will have to be replaced due to damage or wear. The procedure is fairly simple and can be completed by anyone with a bit of experience in DIY. It is crucial that the handle you select matches the dimensions and style of the window. Contact us if aren't sure of the kind of handle you require. They'll be able to assist you with all of the possibilities.