Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This can be caused by a variety of problems, such as dirty tracks or a misaligned slider.

Clean and lubricate your rollers. You can also re-align the rollers by using the adjustment holes located on the bottom of the door panel with movable doors.

Track that is damaged or dirty

A damaged or dirty track can cause the sliding door to not move properly. Over time dirt, grit and even rust could build up making the track unable to move smoothly. A gentle detergent and a brush can do the trick. This process should be carried out regularly to ensure smooth operation and make sure that costly repairs are not required in the future.

A leaking door can also be a common issue. It requires immediate attention in order to stop structural damage, water damage and mold growth. Most often, the issue is due to worn weather stripping and misaligned doors, which can be fixed by replacing the weather stripping and by aligning the door.

Rollers that jump off the track are another frequent issue that can be fixed with some simple DIY work. Find a friend to assist you with this job, as the door can be heavy. To move the rollers around to the right position, sit inside the house and lean one of the panels towards you. To stop the panel from falling, place it on sawhorses when it's been lifted off the bottom track. Then, loosen the roller's screws and then pry them out with the screwdriver. Now you can remove any dirt that has accumulated between the wheel and tracks. You can then clean each wheel using denatured alcohol as well as an rag, and then reposition the wheels and reconnect them to their tracks.

It's possible to straighten bent track sections with a mallet made of rubber and a block of wood. If the bent portion is near hinges or has the potential to cause more damage, it's recommended to call in a professional.

Misaligned Rollers

If your sliding door is having difficulty sliding, it is likely that the roller wheels have been misaligned. The wheels could be dirty, rusted, or their bearings have worn out. This friction causes the door to catch and grind when it is opened or closed. It can also cause noises that sound like squeaking.

Fortunately, this is an easy fix. You don't have to remove the door to get at the wheels, since they are on a bracket which is adjustable. Locate the holes for adjustment (usually on either side of the frame) and use a screwdriver to rotate the screws that control the wheels. Turning the screw clockwise will raise the wheel, whereas rotating it counterclockwise will lower it. Continue adjusting the door until it opens and closes easily.

It is essential to adjust the wheel before making adjustments to your latch. To ensure that the lock functions correctly the latch hooks have to be aligned with the strike plate. If you don't do this the latch could accidentally open or shut even when you're not in the room.

The sliding patio doors are an investment. Maintaining them in good condition will keep your family safe. You can avoid costly repairs by fixing the most common issues, such as broken rollers, tracks and handles. Contact our team for more information about patio doors. We can help you maintain your sliding patio doors in great condition by assessing your repair needs. Our experts are also able to assist with any replacement parts that you may need.

Loose or Damaged Door Frame

Sliding patio doors make a fantastic addition to any home. They offer an attractive and convenient alternative to hinged or swing-open patio door repair service near me door options. Like other hardware items sliding patio doors may be prone to problems in time. Fortunately, most of these issues are easy to fix with a bit of DIY expertise.

A common issue with sliding local patio door repairs doors is a gap in the frame. This could be due to various factors, such as misaligned track or rollers, a damaged door or track or a bent frame. Most of the time the root of the problem can be easily fixed by removing the door and re-attaching the track or rolling elements. This should be done with care so as not to cause damage to the track or frame.

In some instances, it might be required for the entire track to be replaced. This can be done easily with a universal kit, which is available in all major hardware stores. These kits are simple to install and will have your door operating perfectly in no time.

It is crucial to regularly inspect your sliding door frame and hardware for signs of wear and tear, for instance loose bolts or screws. They can usually be tightened with a screwdriver or wrench and is a simple and efficient DIY patio door maintenance procedure. In addition, it is essential to grease your tracks and rollers to facilitate smooth operation and prevent premature wear.

Patio doors are often the main entrance to the backyard and outdoor living area for a lot of homeowners. As such, they need to to function correctly to ensure the comfort of their home and provide security. If you follow these easy DIY maintenance tips, homeowners can prolong the life of their patio door and reduce costly repairs or replacements.

Handle is not working properly

Patio doors that slide open are an excellent way to enter your home and gain access to your backyard, but they can be difficult to operate if they are misaligned. A defective handle can cause the door not to open or close correctly. The good part is that repairing the handle that is loose is a fairly simple job that can be done at home.

In most cases the loose grip is a result of screws that have fallen out of the backplate. To fix this issue, simply tighten the two screws on the inside of the handle using a screwdriver. If the handle is still loose it could be an indication that the threads have worn away and need to be replaced.

Alternatively, a broken latch could be the cause. It is more likely the latch will break if made of metal as opposed to plastic. If the latch is not catching or turning it, try oiling it first to see if this aids. If not, you could have to replace the lock completely.

In the end, the handle could become difficult to use if it is broken or damaged. If this happens, you'll have to replace the handle with one that matches the style and design of your sliding patio doors.

Whether your patio doors are old and dated or brand new, Feldco can help you get them back on track. We have high-quality doors available in different sizes and styles that can be fitted to fit your home perfectly. For more information about our doors, contact us now! We provide homeowners with our services throughout Southern California, including Ventura County, Orange County & San Diego County.

Afflicted Weatherstripping

It's time how to repair patio door lock change your weather stripping if you notice light coming from doors and windows or sense a draft pulsing towards the door or window. The strips form a tight seal that blocks unwanted insects, air, and water from entering your home. They also help keep your conditioned and heated air inside, thereby saving energy costs all year round.

Based on the age of your weather stripping it may have deflated, and lost its buoyant positive seal. It is easy to determine this by taking a dollar bill and running it under the seal on top of the door frame and at the bottom of the door jamb where they overlap. If the dollar bill slides easily between the seal and door with ease, it is time to replace the weatherstripping.

If you replace only the worn-out part of the weather stripping, it could cause problems in the future with the seal. It is much more effective to replace all the stripping. This will allow you to rest sure that your door will be properly sealed.

Follow our DIY guide to weather stripping and install the right material on your sliding patio door and frame, to ensure a tight and lasting seal. This is a great way for you to save energy costs and also fix your sliding patio door repair company near me door. Don't wait until it's too late. You'll save money and enhance the look of your home.